udfn8 3.0x2.0, 0.5p case 517bu ? 01 issue o date 06 apr 2011 dim min max millimeters a a1 0.00 0.05 b 0.20 0.30 d 2.00 bsc e 3.00 bsc e 0.50 bsc notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimensions b applies to plated terminal and is measured between 0.15 and 0.25 mm from terminal tip. 4. coplanarity applies to the exposed pad as well as the terminals. e2 pin 1 1 d e b a c 0.15 c 0.15 e note 3 a note 4 c a1 seating plane c 0.05 c 0.05 0.45 0.55 l 0.35 0.45 scale 4:1 reference top view side view bottom view 1.06 3.30 0.50 dimensions: millimeters mounting footprint 1 b a c c 0.10 0.05 b 8x d pitch 0.63 0.32 outline pkg detail a (0.065) (0.127) detail a l recommended 8x 8x 4 8 5 8x d2 a m 0.10 b c m m a m 0.10 b c e2 0.85 0.95 d2 1.35 1.45 1.56 xxx all ym xxx = specific device code a = assembly location code ll = assembly lot y = year m = month = pb ? free package *this information is generic. please refer to device data sheet for actual part marking. pb ? free indicator, ?g? or microdot ? ?, may or may not be present. generic marking diagram* mechanical case outline package dimensions http://onsemi.com 1 ? semiconductor components industries, llc, 2002 october, 2002 ? rev. 0 case outline number: xxx document number: status: new standard: description: 98aon55336e on semiconductor standard udfn8 3.0 x 2.0, 0.5p electronic versions are uncontrolled except when accessed directly from the document repository. printed versions are uncontrolled except when stamped ?controlled copy? in red. page 1 of 2
document number: 98aon55336e page 2 of 2 issue revision date o released for production. req. by v. craciunoiu. 06 apr 2011 ? semiconductor components industries, llc, 2011 april, 2011 ? rev. 01o case outline number: 517bu on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, in cluding without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different a pplications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical e xperts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc prod uct could create a s ituation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indem nify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney f ees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was neglig ent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner.
|
